Use de-ionised water instead of tap water to make up your bluing solution as this will produce less sludge.

Insert the soft wire inside the gun barrel and bend the end into a hook when it comes out at the other end of the barrel. Soke in aceton for a few minutes then scrub with small wire brush like in your gun cleaning kit or cotton swab or cloth, Then put in Hot water 150 degreas is best with a good squirt of PalmOlive soap and let soak for a few minutes, rinse in hot clean water tap is Ok. Application involves heating the part and swabbing on the solution, followed by carding with a soft wire wheel or steel wool, repeating until the desired color is achieved. It’s the choice of many major firearms manufacturers for touching up guns before they leave the factory. Q. What are the chemicals required and their respective concentration and other temp , pretreatment and post treatment para meters for blueing process and how we can avoid the rusting of it?Furthermore, regular maintenance applications of Ballistol Quick Blueing help protect firearms from rust and corrosion, preserving their value and performance over time.

To dip your gun parts in a hot bluing solution, you will need some soft wire – about 20 inches long. FredB wrote:i used this method 30 years ago in a company laboratory with a glass screen between me and the solution. Eighth, One of the simplest of formulas in the book works very well, a 2 percent by weight solution in distilled water of Ammonium Chloride. It is recommended to test Ballistol Quick Blueing on a small, inconspicuous area before applying it to the entire firearm. Instead of applying the acid solution directly to the metal parts, the parts are placed in a sealed cabinet with a moisture source, a container of nitric acid and a container of hydrochloric acid.Ballistol Quick Blueing is a versatile solution for firearms enthusiasts and professionals who seek to enhance the appearance and durability of their firearms. It is advisable to wear gloves and work in a well-ventilated area to avoid contact with the solution and minimize inhalation of fumes. noticed a totally black spot and it turned out to be the pin for the extractor that I didn't know was even there. I have since read that some of the old rust bluing formulas contained cyanide which have since been discontinued for obvious safety reasons. What started as Maddox’s home-based Federal Firearms License (FFL) has evolved into a Class 3 Dealership and grown into the nationwide brand it is today.

Catching” the right texture and shade of original charcoal bluing finish depends mostly on the underlying metal polish. The loose oxide was then carded (scrubbed) off, using a carding brush – a wire brush with soft, thin (usually about 0.

We always recommend purchasing a reloading manual so that the data is consistant, accurate, and always to hand. A friend showed me an Enfield rifle magazine which was black when rust blued 30 years ago, it is now a satin blue. This brushing is essential to the final high polished finish required for guns such as the Purdey's Holland and Hollands, etc. Rust bluing was developed between hot and cold bluing processes, and was originally used by gunsmiths in the 19th century to blue firearms prior to the development of hot bluing processes.

Hot blue solutions may contain mercury bichloride and an alkali salt mixture of sodium hydroxide and potassium nitrite or sodium nitrate.As aluminium and polymers do not rust, they cannot be blued, and no corrosion protection is provided.