Using a dimmer switch can also cause your smart lights to behave like this. If the lights are not compatible with the dimmer, then you can’t make use of these systems with the dimmer switch. Keep in mind that using a dimmer switch will also damage your lights in the long term, and they will wear out faster.

The most common issue that users have mentioned while using the TCP lights is that they’re not able to get the smart lights connected to the Home Network. Simple to install, and offering great value, these outdoor lights are are fun addition to any garden. However, Wi-Fi over Bluetooth would have been better, and the bulbs are a touch ugly when turned off. Design and Features Most of the time, the experience with these lights will be effortless but if you’re not too sure about the power status, then reaching out to a local electrician is a better idea. One of the best things about LED strip lighting is that you do not have to be an electrician to install them. You can find starter kits that will provide you with everything you need to make the process as easy as possible. Always plan before you get started. Make sure the LED strips are the right length for the space and that you can reach your power source easily. Do you want to learn how to install, cut & connect LED strip lights? This LED strip lights guide will tell you everything you need to know about cutting, connecting and installing LED strip lighting.Most of the time, the situations with these lights not turning on are more related to the hardware and not minor configurations. How to install LED strip lights with a remote? Your strip lights may have a remote or be able to connect to a mobile app. The manufacturer will include instructions to guide you through connecting to your remote controller. Then, take your soldering iron and make small puddles of metal on top of the copper dots, making sure they cover them completely.

You need to make sure that it matches the requirements mentioned in the user manual. Otherwise, you will keep running into similar issues. How do you connect LED strip lights to light switches? Connecting your driver to a light switch requires a little more expert hardwiring knowledge. You need to match the wires on the lights to the corresponding wiring in the switch. If you are unsure, consult a professional.How to install waterproof LED strip lights? If you are installing your lighting outside or in a bathroom, you will want to make sure they are waterproof. Most LED strips have a casing to protect them from water and steam. It is best practice to ensure they have an IP rating of at least 65 to ensure they can hold up against splashes of water and that they will not damage the LED lighting underneath. So, if you’re using a dimmer switch, it is highly recommended that you replace it with a regular switch and then try powering on your lights. While the majority of these issues are easy to fix, you will still need to spend a bit of time on the installation.

Another very common issue with TCP lighting is that users can’t get their smart lights to work with Alexa. Looking to install TCP lighting solutions in your smart home, go through these common issues to increase your understanding of these lights.

Tools

On the other hand, if you’re using a dual-band router, the issue might be more related to the credentials being the same for the 5.0 GHz and the 2.4 GHz channels. Some owners don’t even change the name of these channels. Even after pairing up the skill with the Alexa app, whenever they try using voice commands to turn on the lights, they will not respond. Here are some possible fixes for this problem. Most often than not, these issues are related to unstable voltage or a dimmer switch installed in your outlet. However, if you’re not sure about the power connections in your home and don’t get them serviced every season, then now might be a good time to call an expert.