You will need to measure the flow rate to determine if a positive head pump is suitable for your system. You will need to test all outlets, such as showers and taps, that are going to be pumped to determine if they have the required minimum flow rate of 2L/min. Watch our video to learn how to measure the water flow rate. Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. The patented technologies used in the new CT Xtra and new CT FORCE ranges, are industry leading, and give both the consumer and installer excellent performance, and are easier to install.

The new Salamander CT Xtra range raises the bar for all other entry level shower pumps to follow. With advanced design features this range of single and twin ended shower pumps will quietly and efficiently boost the hot and cold water supplies to thermostatic or manual mixer valves, and are suitable for a wide range of shower types and heads, making the new Salamander CT Xtra pumps the best value for money pumps available. Cold water is delivered to the cold-water storage tank from the water mains. Cold water from the cold-water storage tank is then supplied to the outlets around the system, such as taps, toilets, showers and baths. Bought as a replacement. East to install. Much quieter than our previous pump. Works well. No problems so far. The CT50, CT55, CT75 and CT85 Xtra Pumps are supplied with standard anti-vibration couplers (no isolator valve). A positive head pump will activate when a minimum flow of water passes through the pump and out of the pumped outlet, such as a shower or tap, naturally (without assistance from the pump). The minimum flow rate required for our positive head pumps is 2 litres of water per minute (L/min).

Pallet Delivery

The new Salamander CTXTR pump replaces the long standing CT75. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT75 model. Hands-On Expertise & Collective Knowledge: Our team boasts extensive DIY experience and in-depth knowledge. Regular Updates: Our recommendations stay current with any changes in product performance or availability. The Salamander range of CT Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves.

Comprehensive Research: Our team dedicates extensive time and effort to research and analyze products, so you can make informed decisions. Great little pump. Did have an initial problem, phoned Salamander and replacement pump sent same day. Customer is extremely pleased with the shower performance. The new Salamander CT75+ XTRA pump replaces the long standing CT75. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT75 model. The cold-water storage tank also feeds the hot water cylinder, where a heating coil from the boiler or immersion heater will cause the cold water to become hot. Once an outlet requiring hot water is opened, gravity will force cold water from the cold-water storage tank into the hot water cylinder, this will then force hot water out from the top of the cylinder, delivering hot water to the open outlet. This will be the second pump from plumbworld, the first, same pump doing many miles, a compact, reliable unit, thoroughly recommendedAn excellent pump, easy to install, instructions where straight forward with good advise. The first one Iv used and was very pleased with the low noise, I also used a Salamander pump mat.