The wedges are inserted into the gap between the fence post and panel, then gently tapped into place with a hammer. How to Install Them UPDATE - Thanks for the advice guys! I also sought some legal consultation and they agreed that the fence currently dictates the... Fence panel wedges are a way of stopping fence panels from rattling. The panels rattle if the space between the posts is too big or if there isn’t enough support between the panels and the ground. Rattling fences, from our experience, is a big cause of outdoor noise, especially when windy.

The movement of a fence also helps prevent sagging, which can lead to poles breaking over time. It’s important to build a proper foundation before constructing a fence so it can take this movement. The big disadvantage of using wood is when they get hot, they will expand. If you’ve hammered them in too tight, the fence panels can (and will) break. Tie-Down Straps Fence panels tend to rattle when they are blown by the wind. They can also be damaged by the weather, causing them to become unstable and less effective. The best way to stop fence panels rattling is to install fence panel wedges at each post where a panel meets.Measure out the inside of your post (the bit that goes into the ground) and cut a length of sealant equal to this measurement plus an extra 5cm (2 inches). The extra 5cm will help you get a good tight fit. Nail in cable ties along the top of the fence boards and attach them. This will prevent the boards from moving against each other.

They can be nailed or screwed into the bottom of the wooden fence post. The shims will add an extra layer between the fence and panel and fill the gap. This can mean your fence is more likely to withstand gusts of wind without falling over or splitting.” What’s more important you get whittling kit guiding you to the happiness of seeing that finished product

Boker Plus Appalachian Axe with Hickory Wood Handle

Channel nuts are maybe the best alternative along with panel grips. These are metal plates with a string on one side. These work great as they can be easily pushed into the gap between a panel and fence, with the spring giving the panel enough wiggle room to move with wind, and the wood expansion in the heat. Use Cable Ties This means they will fit the fence in the summer but not the winter and vice versa, and they may even break with the change of seasons. An easy, cheap solution to the problem of fence panels rattling or clanking in the wind is a strip of silicone sealant.