Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

Note: this field becomes visible when 'Bridge interfaces' is set to on and 'Protocol' is set to PPPoE. More firewall zone settings can be configured from the Network → Firewall → General Settings → Zones section. The full text of the EU declaration of conformity is available at the following internet address: https://wiki. Once the user can remotely access the RUT240 router and finds that port forwarding still does not work, the most common reason for this is that the device on the LAN has the IP address details misconfigured, usually missing the default gateway which should be the LAN IP address of the router.

A Private Key Decryption Password is a parameter used to decrypt private keys protected by a password. Allow listed only – only allows devices with specified MAC addresses to connect to your Wireless Access Point. Maximum time (in seconds) the button can be held to perform an action, after which no action will be performed.Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. By default the device’s DHCP server will not start when it is connected to a network segment that already has a working DHCP server.

When configured as mesh node it acts as a mesh router which forwards traffic to and from mesh gateway. The General Setup section is used to turn a wireless device on or off, select the operating frequency (WiFi mode and channel), transmit power and define a country code. To achieve the best signal conditions and maximize cellular performance, try adjusting the antennas or changing the location of your device.The Teltonika RUT240 compact LTE 4G router will be available from June or July 2017 and will replace the RUT500 3G Router.